Re: Howard & Bullough
 

I enjoyed reading the Posts about H&B. My Grand-dad used to light the work lamps around H&B when I was a kid. I cannot recall why those lamps were used but I felt really important helping Grandad on his rounds.

Re: Howard & Bullough
 

:engsmil: I used to work at H&B althought still called that it was in fact Platts.

I was there from 1976 to 1979 and just as I finished it changed to Platt Saco Lowell. I worked in
Travis Rod,
Black-box,
Grinding and Polishing,
Milling and Drilling,
Kit Marshell,
Sub-Assembly
and did some labouring.

Was also on the works fire service and attended many a fire at Stanhill tip as it was the works responsibialty, not sure why though lol,

With regards for Dick Bury the name rings a bell with me as I seem to recall him being an inspector in the travis rod section. :Banane25:

Re: Howard & Bullough
 

[QUOTE=Siddie;259358]Hi my name is Anthea NcKinlay (nee Ashworth) both my dad and grandad worked at Bullers my dad Albert and grandad William known as Bill. Grandad worked there for over 40 years I think he was a foreman or some kind of boss there. Dad worked there when he was around 16, 17, grandad was well known he wasn't a tall bloke he's dead now I think he retired in the 60's have you heard of them. I live in Melbourne. Australia, dad is now 80.

Re: Howard & Bullough
 

[quote=bigphilou;737898]My Father (Joe), and brother (Derek), both worked at Bulloughs. Dad started after 1st WW when he recovered from wounds - I remember him as foreman in the Ring Room and then the Tool Room - I remember the name Crawshaw, Dad eventually took over from him as Superintendent.
My brother was in the Drawing Office but was fired in early '40s for spending too much time running around doing things for the Home Guard. He then went to the Pioneer before departing for foreign parts - Wales being his first stopping point.

Re: Howard & Bullough
 

i believe my grandad Ewart Beech worked at Bullers as a boilerman
can always remember the big lancashire boilers, on brown st..
and i dont mean titty best, and the like...LOL

Re: Howard & Bullough
 

Platt Saco Lowell had a large research establishment on Holcombe Road at Helmshore

Re: Howard & Bullough
 

The Firm was established in 1853 by John Howard & James Bleakey, James Bullough the elder joined the firm in 1857 following the withdrawal of Bleakey


Things started to decline earlier than that it started around 1955 across all depratments. its one of the reasons I left in 1957 and joined the Fire Brigade. Engineering was on its way out, it started even earlier at Lang Bridges where Iserved my apprenticeship.

Retlaw

Re: Howard & Bullough
 

My mother and father were both employed in cotton weaving.
My dad blamed the decline of Lancashire cotton weaving on Howard and Bulloughs.
He said that the machinery they exported to eastern countries had drastically reduced the demand for cotton woven in Lancs

Re: Howard & Bullough
 

Hi bigphilou
Im sorry the name doesnt ring a bell My grandad Arthur Livesey worked at bulloughs as a charge hand/fitter and was a union man but thats all I know I am afraid, there may be a few out there that remember my dad Cyril Whittaker though who was a barber in Burnley Road Accrington and is still going strong at the grand old age of 86yrs in October

Re: Howard & Bullough
 

My Grandad worked at Bulloughs. They must have gone on strike or were thinking about going on strike at one stage because I remember him singing a song ''Bulloughs are going out on strike''.

Re: Howard & Bullough
 

I served my time at Bulloughs as a fitter 1945-1952. My department was Ring Frames on the top floor. Cashy is right. We used to clock in with a numbered metal disc.One of my best friends was Frank Fielding who worked in the personnel Office. He played cricket for Enfield.I won a prize as the best apprentice in 1951. The prize was a month at the Outward Bound Mountain School in Cumberland.Bulloughs had their own school for the apprentices. I think it was up Willows Lane but my memory is not good these days. I remember going to Night School 4 nights a week 6 to 9. Some of the lessons were in the old Grammar School.I left Bulloughs when I finished my apprenticeship in 1952 and had to go and do my National Service.

Re: Howard & Bullough
 

My uncle Paddy Mckenna worked at HB FOR YEARS.

Re: Howard & Bullough
 

[quote=Jim Procter;738126]I served my time at Bulloughs as a fitter 1945-1952. My department was Ring Frames on the top floor. Cashy is right. We used to clock in with a numbered metal disc.

Those numbered checks had H & B and your number stamped on them. you had 3, No1 was for morning, No 2 was for afterdinner and the No 3 you chucked in the box when you were leaving if you had been on overtime.

All the checks were hung on department boards in numerical order and during the afternoon a bloke came round with the department boards and gave you your checks back.
Lang Bridges had the same system, but you had a 4th check that was used on a friday to collect your pay which was on a big table in the Tinners shop, your pay was in a little tin tube held in trays for each department, handed out by Reggie from the pay office.
My number at Langs was J 10.

Retlaw.

Re: Howard & Bullough
 

Didn't Bullough's have a yard between Lonsdale street and the lodge? Lorries were always in and out of it next to springhill WMC

Re: Howard & Bullough
 

Yes it was their timber yard.

Retlaw.